KEF Audio KIT100 installation manual English instructions, Unpacking, Video connection setup

English instructions

unpacking

Carefully unpack your system. Save all packing materials, which provide the safest way to transport your system as needed.

WARNING:

To avoid danger of suffocation, keep the plastic bags out of the reach of children.

If any part of the system appears damaged, do not attempt to use it. Notify your authorised dealer immediately. Check to be sure your system includes the parts shown (page 1).

Note:

Please make a note of the serial numbers on the bottom of the DVD unit and the rear of the subwoofer. Copy those numbers onto your warranty card and in the space provided below.

For your records

Serial numbers are located on the bottom of the DVD unit and the rear of the Subwoofer module.

DVD unit serial number: ______________________________________________________________________________________

Subwoofer module serial number: ________________________________________________________________________________

Dealer name: ______________________________________________________________________________________________

Dealer phone: ______________________________________________________________________________________________

Purchase date: ______________________________________________________________________________________________

User defined DVD parental code: ________________________________________________________________________________

We suggest you keep your sales receipt and warranty card together with this owner’s guide.

video connection setup

Selecting the correct input on your TV

The KEF Instant Theatre on-screen displays will only be present on your TV screen if the TV’s external input is properly set to the correct input which is connected to the DVD player.The video input selection is most commonly made on televisions by pressing the TV’s remote control button marked ‘TV/Video’,‘Input’,‘AV in’ or ‘Aux’.

Selecting Component and Progressive DVD output

When using the component video connection to your TV (whether progressive or not) you must connect the composite video connection as well to allow you to set the component option while the default DVD output is composite only. Once you have selected the component option in the DVDs video settings menu change the TVs input source to compontent and then select progressive if supported by your TV.

Video loop-through

The KEF Instant Theatre only plays composite video inputs on the composite vido output and only plays SVideo inputs on the SVideo output.You will therefore need a composite or an SVideo lead if you are using these as video sources.

Record and Multi-room audio outputs

Stereo mode must be selected in the Audio menu when using the left and right Record/Multi-room output on the back of the subwoofer to turn the surround sound off.

10