Ken-A-Vision Network Setup, Admin Tool, Video Tool, Network Video Flex 7700 Manual

NETWORK SETUP 4

Must have at least 2 static IP's received from your ISP.

Configure your 7700's TCP/IP properties as follows:

Network Type	STATIC
Internet Address A	private	IP address such as 192.168.0.200
	[Example]
	A.	You need to assign the	7700	an IP
		address, just as you would assign a PC.
	B.	The IP address you assign	must be	unique
		to your network as well as match your
		network. For information how to choose a
		unique IP and match your network please
		read the FAQ.
	C.	The IP address you assign	the 7700 must
		be a private IP. For information on how to
		chose a private IP please read the FAQ
Subnet Mask	255.255.255.0 [Example]

A.You must use the same subnet mask as the one you noted under "Current TCP/IP Settings".

Default Gateway 192.168.0.1 [Example]

A.This IP address must be the IP address of your router (private or LAN side)

B.Use the same Default Gateway you noted under "Current TCP/IP Settings"

Primary DNS Server Use the 1st DNS Server from "Assigned IP

Address from My ISP"

A.If you did not receive any IP addresses from your ISP, please contact them and acquire the IP address of their DNS server.

Web Server Port 8888

A.Do NOT use the default port 80, you must change this number.

B.You may select any number between 1025- 30000.

Video Server Port7777

A.You may select any number between 1025- 30000.

ADMIN TOOL 6

This section is provided to familiarize the user with the administration tools. Intuitive options are not explained in detail.

All the options under Administration Tools take effect in real time the instant the new settings are applied. These settings will be global, affecting all users cur- rently logged on.

All settings are global and take place immediately except for the 'Caption' set- tings which require all users to logout or refresh their browser before noticing a change on the OSD.

Video Tool

Camera Name	Give a name to the 7700. Only affects what is
	displayed		on	the	OSD.	(Maximum		7
	characters available)
Caption	Determine		what items are displayed on					the
	OSD. Changes will take effect only after							the
	user logs out.
Color	Select	this	option to		change	the color picture
	to a black/white picture. Changing to "Gray"
	may increase FPS rates slightly when viewing
	remotely.
Resolution	Select	the	resolution (or screen size) of the
	video stream. Obtain maximum FPS at the
	320x240		resolution.		Higher	the	resolution,
	lower the FPS remotely.
Frame Rate	Select	the	frame rate of video stream					to
	control the traffic of network.
Quality	Adjusts the quality setting. Higher the quality,
	lower the FPS remotely.
Brightness	Input a value to adjust the brightness of the video
	stream.
Contrast	Input a	value to		adjust	the contrast of		the video

stream.

Network Video Flex® 7700 Manual www.ken-a-vision.com Network Video Flex® 7700 Manual www.ken-a-vision.com