Kenmore 116.31913, 116.31912 To Remove Light Bulb, ElectricalShock Or Personal Injury Hazard

WARNING

Remove the light bulb by

ElectricalShock Or Personal Injury Hazard

Disconnect electdcal supply before servicingor cleaning the unit. Failure to do so could result in electrical shock

or personal injuryfrom cleaner sud- denly starting.

TO REMOVE LIGHT BULB

Disconnect power cord from electrical out- let.

pulling straight out.

To Release

To replace the light bulb careful-

ly insert fully into slot.

Light

Pry light lens out at slot in rear as shown on both sides.

Rotate lens up and lift off.

Note: See PARTS AND FEATURES for bulb number.

Slots

CAUTION

Do not use a bulb rated over 9W (13V). During extended use, heat from the bulb could overheat surroundingplastic

To maintain efficient cleaning, the agitator must be kept free of carpet pile, string, or hair build-up. After every 7 to 10 uses, unplug and turn vacuum over and check agitator for string and hair build-up.

Use a scissors to remove any build-up entangled around the agitator.

uDCAUTIONotplug° inor turnon untilthe vacu- I

s completely reassembled.

To replace light

lens, place tabs at front of lens

into slots. Rotate lens down and

snap into place.

17