Your Kenmore vacuum cleaner features a two (2) speed, direct drive agitator for cleaning a variety of floor surfaces, Please review the table below before using your vacuum cleaner,
I.Do not use the CARPET setting (high speed) for cleaning berber style car- pet. The high agitator speed could damage the carpet or cause excessive carpet wear.
When the vacuum cleaner is running with normal air flow, the light on the performance indicator is off. The light comes on whenever the airflow becomes blocked° If that occurs, check the disposable dust bag, motor safety
filter and other possible clog locations shown in CLOG REMOVAL.
NOTE: The light may come on when using certain attachments, due to reduced airflow through attachment.
2_ Use the GENTLE setting (low speed) ONLY for berber or delicate pile car- peting. The agitator may slow down or stop on thick carpeting, area rugs or throw rugs. If agitator stops and does not restart, see AGITATOR MOTOR OVERLOAD PROTECTOR.
1The FLOOR setting may be used for all indoor bare floors including wood, tile, linoleum, slate etc.
Touch | Control |
| Bare | Commercial | Berber | 1 | I |
|
Agitator | or Delicate | I | ! | j Area | ||||
Setting |
|
| Floor | or Low Pile | Carpet | PILP.J.u2hjShag" | Rug | |
| _ s_.__Sp_e2 | V' | ||||||
Carpet | (1) | High |
|
|
|
|
| |
Gentle | (2) | Low |
|
|
|
|
|
|
Floor | (3) | Off |
|
|
|
|
|
|
To select a pile height setting:
Turn off vacuum cleaner, Select a pile height setting by tilting the cleaner back until the front wheels are lifted slightly off the floor.
Slide the adjustment lever to the correct setting,
There are four (4) pile height settings on the vacuum cleaner. Use the LOW setting for most
CAUTION
Do not allow vacuum cleaner to remain in one spot for any length of time when the agitator is turning. Damage to carpet may occur.
10
