Please pay special attention to these hazard alert boxes, and follow any instructions
&givem WARNING statements alert you to such hazards as fire, electric shock, burns and personal injury° CAUTION statements alert you to such hazards as personal injury and/or property damage.
, WARNnNG
Electrical Shock Hazard
Do not plug into the electrical supply
until the assembly is complete, Failure to do so could result in electrical
shock or injury.
Before assembling the vacuum cleaner, check the PACKING LIST on the cover of
the separate REPAIR PARTS LIST. Use this list to verify that you have received all the components of your new Kenmore vacuum cleaner°
CAUTION
Do not overtighten.
Overtightening could strip the screw holes.
Do not operate the vacuum cleaner without the screw in place.
CORD ASSEMBLY
Make sure the quick release upper cord hook is in the upright position° Remove the wire tie from the power cord.
HANDLE ASSEMBLY
Remove the combination brush from the handle to expose the handle mount- ing hole.
Remove the handle screw from the body of the vacuum cleaner.
Position the handle assembly as shown in the illustration below°
When installing the handle, firmly press the handle onto the body. Secure with handle screw provided.
Make sure the power cord is placed into the lock- ing notch on the body as shown_ This helps keep the power cord out from under the vacuum cleaner agitator.
Lockin
Notch
Power
Cord
Begin to tighten the screw with your fin- gers. tt may be necessary to adjust the handle slightty_
Using a screwdriver, tighten handle screw_ Reinstall combination brush.
Elec trica!
Connection
Handle
Assembly
Handle
Screw
Release
Cord Hook
CordPlug
Carrying
Wrap the power cord around the quick release cord hook and the carrying handle. Lock the power cord plug onto the power cord.
