Kenmore 153.320590 HT 50 GAL Installation Instructions contd, Converting the Lower Element contd

Installation Instructions (cont'd)

Converting the Lower

Element (cont'd)

9.Tighten terminals 2 and 3 to ensure proper electrical

couNec_on.

IAWARNING

Failure to tighten terminal screwscan cause a fire which I can result in DEATH, SERIOUS BODILY INJURY, OR I

PROPERTY DAMAGE.

12.The adjustment dial has a "D" shaped opening that matches a "D" shaped shah on the thermostat. Align the opening in the dial to the shaft and gently push the dial onto the sh_ft.

10.Replace terminal cover on the thermostat, making sure the notch is in place over the tab.

13. Replace the access panel.

t	AWARNING	I
	Make sure the therm_against	the tank, the I

terminal cover is in -place,and'"'"the insulation is replaced. Failure to do so can result in DEATH, SERIOUS BODILY

INJURY,OR PROPERTY DAMAGE.

11.Fold the insulation back in place so that it completely covers the thermostat and element.

/

14, Complete wiring to the water heater, or if completed, turn

"ON" electric power to the water heater after filling the tank with water.

	--x
:'I _;	_v

I A CAUTION 1

Never use this water heater unlessit is completely full of water. To prevent damage to the tank and heating ele-ment, the tank must be filled with water. Water musti

flow from the hot water faucet before turning "ON"

power.

12