11.Assemble shelf support brackets by sliding shelf bracket (A) and Shelf bracket (B) together while paying close attention to hole alignment, and attach the two with (2) #10 x 1/2" screws. Repeat for second set.
12. After joining shelf bracket (A) and (B), align holes
along bottom flange of brackets with corresponding holes
along top edge of casting support. Fasten with (2) #10 x 1/2" screws.
(Note: Bottom flanges on shelf support brackets should point toward interior of grill.)
I
I
I
I
13.Attach second shelf support bracet using (2) #10 x 1/2" screws.
#10 x 1/2Phillips Screw
12
