32.Attachthetwowiresfromthecrosslighter andthetwowiresfromthesideburner
toanyofthefoursmallterminalson ignitormoduleasshown.
I0nitorModule
Next,Attachthetwowiresfromconsole
assemblytothetwolargeterminalsonignitor moduleasshown.
(2) Large
Terminals
Important: Be sure to attach wires correctly to terminals.
CorrectIncorrect
NOTE: Use one of the supplied plastic ties to bundle the two large terminal wires together, and one to bundle the four small terminal wires together.
33.After wiring ignitor module ensure that all burner knobs are in the off position before installing the battery.
Install the battery
34. Snap ignitor module tabs into holes on back left side of front
panel as shown.
NOTE: Do not remove ignitor module once installed. The plastic mounting tabs on the ignitor "hook" into the mounting holes and are not designed to be repeatedly removed and
23
