![](/images/new-backgrounds/1009543/954311x1.webp)
Before assembling vacuum, check the PACKING LIST on the cover of the separate Repair Parts List. Use this list to verify that you have received all the components of your new Kenmore vacuum.
Electrical Shock Hazard
DO NOT plug into electrical supply until assembly is complete. Failure to do so could result in electrical shock or injury.
ii | IIIl_llnl, | II | I | i, |
Handle
Button _ ___
WANDS
Slide wands together until wand button
snaps into place. Turn wand button to the slotted area of the wand swivel.
The swivel allows
you to turn the handle to the left side to reach far- ther under low furniture°
Button
6
i
Wand Swivel
Cord Holder /
Wand Swivel
POWER-MATE TM
1.Insert wands into POWER*MATE _ until the wand buttons snaps into place.
2.Connect
POWER-MATE _
Raised
POWER- MATE TM
Wand
Area
plug and cord as shown° DO NOT force. Raised area
of plug must be toward hand.
Wand
Button
Swivel
Wand Quick
3. Secure cord into cord ho_der on wand swivel,
To remove; Disconnect cord and step on wand release pedal, then pull up on wands.
Release Pedal
6