Kenmore 2200128 manual Adjusting the control, To remove the crisper, To replace the crisper cover

The convertible vegetable/meat drawer can be adjusted to properly chill meats or vegetables. Unlike most chilled

meat drawer systems, the Temperature Control cools the air inside the pan. (Most systems chill only the pan itself, which doesn't cool the air inside the pan evenly).

Chilling the air inside the pan provides more even cooling

and reduces "spot" freezing. The Temperature Control can be set to keep meats at the recommended storage

temperatures (28°F-32°F are the recommended storage temperatures from the National Livestock and Meat Board).

To store vegetables at their optimal storage temperatures

(which need to be warmer than those for meat), set the control at the Vegetable setting, all the way to the left.

To remove the crisper:

1.Slide crisper straight out to the stop.

2.Lift the front.

3.Slide crisper out the rest of the way.

Replace the crisper by sliding it back in fully past the drawer stop.

To remove the crisper cover:

1.Remove crisper.

2.Holding glass insert firmly, grasp one side of crisper cover and lift the other side up from the bottom.

3.Slide the glass insert out to remove.

4.Lift cover frame up and remove.

IMPORTANT: To extend freshness even more, remember to wrap meats in airtight, moisture-proof materials before

storing. Always store meat as recommended by the National Livestock and Meat Board. See "Storing fresh

food" in the "Food Storage Guide" section for more information.

Adjusting the control

The convertible control comes preset for you at the lowest meat setting. Move it to the mid-setting or "colder" as desired.

To change a control setting: move the control to the right (colder) or to the left (less cold).

To store vegetables: move the control all the way to the left to the VEG setting.

IMPORTANT: tf food starts to freeze, move the control to the left (less cold). Remember to wait 24 hours between

adjustments. Doing so gives the temperature of the food time to change.

To replace the crisper cover:

1.Fit back of cover frame into supports on side walls of the refrigerator.

2.Lower front of the cover frame into place.

3.Slide rear of glass insert into cover frame and lower front into place.

18