Air Conditioner Features
(continued)
ADDITIONAL THINGS YOU SHOULD KNOW
Now that you have mastered the operating procedure, here are more features in your control that you should become familiar with.
•Remote control works exactlylike the control panel, follow the same instructions.
•The "Cool " circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly. This prevents overheating of the compressor and possible circuit breaker tripping. The fan will continue to run during this time.
•The control will maintain the set temperature within 2 degrees Fahrenheit, between 60F and gOFdegrees.
•Any sudden power failure will causethe letters "PF" to flash in the display. Touching any pad twice will restore the unit to the previous function chosen.
Figure 1 (OFF)
Figure 2 (FRESHAIR)
Figure3 (VENT)
Fresh Air Vent Control
The Fresh Air Vent allows the air conditioner to recirculate inside air (OFF), draw air into the room (FRESHAIR) or exhauststale air to the outside (VENT). SeeFigures 1, 2 & 3 for this operation.
• The "OFF" position is used when MAXIMUM cooling is desired. It may also be for room air re*circulation without cooling when the selector switch isset to the FANposition, this will also filter the room air.
• The FRESHAIR position allows outside air to be drawn into the room to refresh the inside room air.
• The VENTposition removes stale air from the room and exhausts it to the outside.
• Any vent position can be used with any fan selection.
10
