Instructions

J Important Safety

Avoid fire hazard or

electric shock. Do not use an extension cord or an adaptor plug. Do not remove any prong from the power cord.

Grounding type wall receptade

under

Power supply cord with 3-pronc grounding plug

Read all instructions before using this air conditioner,

For Your Safety

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Readproduct labels for flammability and other warnings.

Prevent Accidents

To reduce the risk of fire, electricalshock, or injury to persons when using your air conditioner, follow basic precautions, including the following:

Besure the electrical service is adequate for the model you have chosen.

If the air conditioner is to be installed in a window, you will probably want to clean both sides of the glass first. If the window is a triple-track type with a screen panel included, you may want to remove the screen completely before installation.

Be sure the air conditioner has been securely and correctly installed according to the separate installation instructions provided with this manual. Save this manual. Save this manual and installation instructions for possible future use in remoVing or reinstalling this unit.

When handling the air conditioner, be careful to avoid cuts from sharp metal fins on front and rear coils.

Electrical Information

The complete electrical rating of your new room air conditioner is stated on the serial pl:_te. Refer to the rating when checking the electrical requirements,

Be sure the air conditioner is propedy grounded. To minimize shock and fire hazards, proper grounding is important, The power cord is equipped with a three-prong grounding plug for protection against shock hazards.

Your air conditioner must be used in a properly grounded wall receptacle. If the wall receptacle you intend to use is not adequately grounded or protected by a time delay fuse or circuit breaker, have a qualified electrician install the proper receptacle.

Do not run air conditioner with outside protective cover in place. This could result in mechanical damage within the air conditioner.

_r Do not use an extension cord or an a_apter plug.

I I

Energy Saving Ideas

The capacity of the room air conditioner must fit the room size for efficient and satisfactory operation.

Install the room air conditioner on the shady side of your home. A window that faces north is bestbecause it is shaded most of the day.

Do not block air flow inside with blinds, curtains or furniture; or outside with shrubs, enclosures, or other buildings_

Close the fireplace damper, floor and wall registers so cool air does not escape up the chimney and into the duct work.

Keep blinds and drapes in other windows closed during the sunniest part of the day.

Clean the air filter as recommended in the section "Care and Cleaning."

Proper insulation and water stripping in your home will help keep warm air out and cool air in.

External house shading with trees, plants or awnings will help reduce the air conditioner'swork load.

Operate heat producing appliances such as ranges, washers, dryers and dishwashers during the coolest part of the day.

Page 2
Image 2
Kenmore 309000845 owner manual Instructions Important Safety, Energy Saving Ideas, For Your Safety, Electrical Information