Kenmore 309000845 Air Conditioner Features, To Increase, Delayed Start Time, w SLEEP FEATURE

Air Conditioner Features

(continued)

STEP 8 w TIMER-DELAY	YOU WILL SEE:
START FEATURE:

DO THIS:

PRESSOFF (If unit is running)

PRESSTIMER/OFF

Note: To do this, the unit must be in the off position.

When first set, the display will show .5. (one half hour),to increasethe time up to 24 hours, go to step 9,

STEP 9 --TO INCREASE

DELAYED START TIME: YOU WILL SEE TIME CHOSEN:

DO THIS:

PRESS

Note: Tap or hold the UP arrow(A) to increase delayed star,_time by .5 hours (up to 10 hours), then in 1 hour increments up to 24 hours. The control will count clownthe time remaining until start (8, 7.5, 7, etc.).

The unit will then come on in Cool and HI fan mode. The temperature maintained will-be the same as you previsouly set. If you want to change it, Press'Cool" or "PowerSaver Mode" pad, whichever you desire, then Up or Down arrows until the desired temperature is indicated on the display. Pressingtimer "On/Off" or after 5 seconds, the control will automatically change the display back to the hours remaining until the unit will start.

Switching unit on at any time will nullify this setting.

STEP 10 w SLEEP FEATURE: YOU WILL SEE:

DO THIS:

PRESSON/OFF

PAD

Note: In this "MODE" the selected temperature will increase by 2 degrees F 30 minutes after the mode is selected. The temperature will then increase by another 2 degrees Fafter an additional 30 minutes. This new temperature will be maintained for 7 hours before it returns tO the originally selected temperature. This ends the "Sleep" MODE and the unit will continue to operate as originaUy programmed. The "Sleep" MODE program can be cancelled at any time during operation by pressing

_Sleep" MODE, "On/Off", "Fan Only" or the "V //X" buttons, on either the Control or the Remote. "Time Delay Stop" limit reached will also end "sleep" MODE.

8