Using Air Conditioner
NOTE: If the air conditioner is turned off or the temperature is changed to a lower setting then back to a higher setting the compressor will shut off. Wait 3 minutes before the compressor will restart, this allows for the pressure inside the compressor to equalize.. Failureto wait 3 minutes may cause inefficient operation. When adjusting the temperature the fan will continue to run.
To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANTSAFETYINSTRUCTIONSbefore operating this appliance.
To begin operating the air conditioner, follow these steps:
1.Plug in the air conditioner. (Toprevent electricaIhazards, do not use an extension cord or an adapter plug.)
2.Set the exhaust vent to the CLOSEDposition.
3.Press"On/Off" button to turn unit on.
4.PressFan Speed "Ht"
5.PressMode "COOL"
6.Press"TEMP/TIME" down v to the lowest setting "60 degrees"
7.Adjust the louversfor comfortable air flow.
8.Once the room has cooled, adjust the "TEMP/I"IME" and Fan Speed to desired temperature.
Review the "Air Conditioner Features" section for other settings.
Air Conditioner Features ELECTRONIC CONTROL OPERATING INSTRUCTIONS
| Before you begin, thoroughly familiarize yourself with the control panel and remote | |
| as shown below and all its functions, then follow the symbol for the functions you | |
ON/OF_ | desire. The unit can be controlled by the touch | pad alone or with the remote. |
| LOWERS | DISPLAYS |
| TEMPERATURE _ | TEMPERATURE/TIME |
| oR'rIME |
|
TURNS UNIT
ON OR OFF
RAISES
OR "NMES
SPEEDS
SETSJ
REMOTE CONTROL
Slip battery cover off and pull the piece of plastic from between the battery end and the connector.
PIECE
