Air Conditioner Features
(continued)
STEP 5 -- TO OPERATE
ON FAN ONLY: | YOU WILL SEE: |
| |
| DO THIS: |
| PRESSON |
| (if not running) |
| PRESS |
| FAN ONLY |
Note: Use this function only when cooling is not desired, such as for room air circulation or to exhaust stale air.(remember to open the vent during this function, but keep it closed during cooling for maximum cooling efficiency.) You can choose any fan speed you prefer.
During this function, the display will show the actual current temperature, not the set temperature as in the cooling mode.
STEP 6 |
|
SAVER FEATURE: | YOU WILL SEE: |
DO THIS:
PRESS
POWERSAVER
Note: In this mode, when the compressor shuts off, the fan will continue to run for another 3 minutes, then shut off until cooling is needed, as sensedby the room temperature control. During this time, it may come on for 3 minutes to sensewhether cooling is needed, then it will go off for 10 minutes. It will continue doing this to sample the room air for as long as necessary.
STEP 7 | YOU WILL SEE: |
STOP FEATURE |
DO THIS:
PRESS
PRESS
Note: The unit must be running to make this setting.
Proceed as in step 9 to change the desired number of hours, before the control will time out and turn off.
