Kenmore 580.75080 Control Panel, Remote Control Signal Receiver Temperature Setting, Auto Restart

CONTROL PANEL

REMOTE CONTROL SIGNAL RECEIVER

TEMPERATURE SETTING

•Use these buttons to automatically control the temperature of the room. The temperature can be set to one of a temperature between 64°F to 82°F.

•Push the TEMP up or down buttons to shift the temperature setting from

82°F• 76°F•70°F •64°F

[,.. ..............................................

---_-

ITIMER

- SHUT-OFF TIME

•You will usually use shut-off time while you sleep

•If unit is running, Usetimer to set numberof hours until shut-off •,Every time you push Timer button, it advancesthe Timer

setting as follows: 1 Hour • 3 Hours• 6 Hours• 10 Hours maximum.

- STARTTIME

• Ifunitis off,Usetimerto setnumberof hoursbeforeunitstarts.

POWER

•To turn the air conditioner ON, pushthis button. To turn the air conditioner OFF, push

the button again.

•This buttontakes priority over any other button.

•When you first turn it on, the air conditioner is on the High cool mode and the Temp. at 70°F.

AUTO RESTART

•In the event of a power failure, the unit will run at the previous.

•Everytime you push Timer button, it advancesthe Timer setting as follows: 1 Hour• 3 Hours• 6 Hours•10 Hours maximum.

MODE

•Push this button to shift the mode of operation from COOL-HI • COOL-LOW • FAN ONLY-HI • FAN ONLY- LOW.

HORIZONTAL AIR DIRECTION CONTROL

The horizontalair directionis adjusted by movingthe vertical louversright and left with your fingertips. (FIG. 15)

VERTICAL AIR DIRECTION CONTROL

The verticalair directionis adjusted by movingthe horizontal louvers up and downwith your fingertips.(FIG. 16)

)

FIG. 15

-10-