Kenmore 580.75281 Observeall Local Codesand Ordinances, Do Not, Under Any Circumstances,Remove

Models: 580.75281

1 32
Download 32 pages 16.86 Kb
Page 4
Image 4
OBSERVEALL LOCAL CODESAND ORDINANCES.

OBSERVEALL LOCAL CODESAND ORDINANCES.

DO NOT, UNDER ANY CIRCUMSTANCES,REMOVE

THE POWERSUPPLY CORD GROUND PRONG.

ELECTRICALGROUND IS REQUIREDON THIS APPLIANCE.

For 230/208volt 60 Hz,AC only, 15Afused and properlygroundedelectricalsupply is required.A time delay fuseor time delay circuit breaker is recommended.Usea dedicatedcircuit,servingonly thisappliance.

DO NOT USEAN EXTENSIONCORD.

115V~230V~

NOTE: The shape may be different according to its model.

RECOMMENDEDGROUNDINGMETHOD

Foryourpersonalsafety,thisappliancemustbegrounded. Thisappliancehasa powersupplycordwitha 3-prong groundingplug.To minimizepossibleshockhazard,the cordmustbepluggedintoa matinggroundingtypewall receptacleandgroundedinaccordancewiththe National ElectricalCode(ANSl/NFPA70)latesteditionandalllocal codesandordinancesIf. amatingwall receptacleis not available,it isthe personalresponsibilityandobligationof the customerto havea properlygrounded3-prongwall receptacleinstalledbya qualifiedelectrician.

Power cord may include a current interrupter device. A test and reset button is provided on the plug case. The device should be tested on a periodic basis by first pressing the TEST button and then the RESET button. If the TEST button does not trip or if the RESET button will not stay engaged, discontinue use of the air conditioner and contact a qualified service technician.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

You can choose between two

methods

below

according

to your window

sill shape

and preference.

USING

SLIT

"A"

 

 

 

 

 

USING SLIT

"B"

 

Fasten

the stopper

using 2

screw holes,

and

lead

Fasten the stopper using

left screw hole, and rotate

out the

power

cord

through

slit

"A".

 

 

properly to lead

the power

cord out through slit "B".

!_

Power Cord

_

-4-

Page 4
Image 4
Kenmore 580.75281 Observeall Local Codesand Ordinances, Do Not, Under Any Circumstances,Remove, Do Not Usean Extensioncord