_r-tFRONT INSTALLATION

Install the front grille(packed separately) onto the cabinet as follows:

•Hook upper tabs of front grille into slots on the cabinet top. (FIG. 17)

•Push front grille's tips towards the cabinet in order to snap side tabs into the cabinet. (FIG. 17)

•Open the inlet grille. (FIG. 18)

•Install the screw (ITEM E) through the front grille. (FIG. 18)

•Close inlet grille. (FIG. 19)

Front Installation

FIG. 17

ITEM E

 

Front Installation

FIG. 18

Front Installation

FIG. 19

_T_IF AIR CONDITIONER IS BLOCKED BY

STORM WINDOW FRAME

•If storm window presents interference, fasten a 2" wide wood strip to the inner window sill across the full width of the sill. The wood strip should be thick enough to raise the height of the window sill so that the unit can be installed without interference from the the storm window frame. See FIG. 20.

Top of wood strip should be approximately 3/4" higher than the storm window frame to help condensation to drain properly to the outside.

•Install a second wood strip (approximately 6" long by 11/2" wide and same thickness as first strip) in the center of the outer sill flush against the back of the inner sill. Screw the Window locking brackets into this strip.

This will raise the Window locking bracket as shown in FIG. 20.

 

 

1 1/2" min.

 

 

 

WOOD STRIP MOUNTED

(38mm)

 

 

 

ON TOP OF INNER SILL

-_'-I

I_

 

3/4"

±

 

 

/

 

 

CLEARANCE

T

 

 

 

 

 

STORM

_

J

I WINDOW/ _"

_

 

WINDOW

 

INNER

I LOCKING /

 

 

I FRAME

 

SILL

I BRACKED/

 

 

I

 

 

I

WOODSTRIP

 

I

 

 

 

I FORWINDOW

 

I

\

 

 

I LOCKING BRACKED I

OUTER

 

 

%

 

I S'LL

INSIDEII OUTSIDE

FIG. 20

REMOVAL FROM WINDOW

•Turn off and unplug the air conditioner.

•Remove the front grille. See HOW TO REMOVE THE FRONT GRILLE. Refer to page 13.

•Unscrew the side screws that you installed in Step 15.

•Slide the air conditioner out of the cabinet.

BE CAREFUL NOT TO DROP IT. Hold onto it firmly the whole way sliding it out. Once removed, set it safety out of the way.

•Remove the Window locking bracket from window frame and the sash seal from between the windows.

•Unscrew the side curtains from the window frame. Fold them back to the sides of the cabinet.

•Remove screws attaching cabinet to inner sill. Be careful not to let cabinet fall once screws are removed.

•Remove cabinet from window opening.

•Place air conditioner into cabinet. Reinstall side screws and Front Grille.

•Place unit and all assembly hardware in air conditioner shipping carton, and store in clean, dry place.

•Air conditioners covered in this manual pose an excessive weight hazard. Two or more people are needed to move and install the unit.

To prevent injury or strain, use proper lifting and carrying techniques when moving unit.

•When handling the air conditioner, be careful to

avoid cuts from sharp metal fins on front and rear coils.

•Make sure air conditioner does not fall during removal.

-8-

Page 7 Page 9
Page 8
Image 8
Kenmore 580.75281 Removal from Window, TFRONT Installation, TIF AIR Conditioner is Blocked by Storm Window Frame
Page 7 Page 9

580.75281 specifications

The Kenmore 580.75281 is a high-performance air purifier designed to enhance indoor air quality in homes and offices. With an emphasis on advanced filtration technologies, this model effectively captures a wide range of airborne pollutants, making it an ideal choice for individuals with allergies, asthma, or those simply seeking to breathe cleaner air.

One of the standout features of the Kenmore 580.75281 is its comprehensive four-stage filtration system. It includes a pre-filter designed to capture larger particles like dust, pet hair, and lint. This initial layer is crucial as it prevents these larger particles from clogging the more intricate filters that follow. This results in more efficient operation and longer filter life.

The True HEPA filter is the heart of the air purifier. Capable of capturing up to 99.97% of microscopic allergens down to 0.3 microns, this filter effectively reduces common irritants such as pollen, mold spores, smoke, and pet dander. By significantly reducing these harmful particles, the 580.75281 promotes healthier breathing conditions, particularly for those who suffer from seasonal allergies or respiratory issues.

In addition to the True HEPA filter, the Kenmore 580.75281 features an activated carbon filter that effectively absorbs odors and harmful gases. This is particularly beneficial in households where cooking smells, pet odors, or smoke can accumulate. The combination of HEPA and activated carbon filtration ensures that the air is not only free from allergens but also fresh and pleasant.

Another technological highlight is the air purifier’s Smart Sensor feature. This advanced system automatically monitors the air quality and adjusts the fan speed as needed. The LED indicator provides real-time feedback, allowing users to see how changes in the environment impact air quality. This not only optimizes performance but also enhances energy efficiency.

The Kenmore 580.75281 is also user-friendly, equipped with a simple control panel that allows users to select from multiple fan speeds. Additionally, the unit runs quietly, making it suitable for use in bedrooms and living spaces without disturbing daily activities or sleep.

With its robust build, sleek design, and effective multi-stage filtration system, the Kenmore 580.75281 proves to be an excellent investment for anyone looking to ensure cleaner, healthier indoor air. Whether for allergy relief or simply improving overall air quality, this air purifier delivers impressive results in a user-friendly package.
Top Page Image Contents