Kenmore 625.3485500, 625.3485400 1B. CHECK LIST OF ALL STEP-BY-STEP GUIDES TO INSTALL, Section

SECTION 1

WATER SOFTENER START-UP

1B. CHECK LIST OF ALL STEP-BY-STEP GUIDES TO INSTALL

Refer to the Installation Manual, part no. 7141417, for step-by-step guides.

To be sure you have done all the steps to install the softener, read the following list. Page num- bers referred to are in the Installation Manual.

4Is the house water flow going INTO the soft- ener valve INLET? Trace piping to be sure. See pages 10 and 11.

4Is the plumbing bypass valve (or 3 valves) set for SERVICE? See FIG. 12, page 19 of this manual.

4Is the valve drain hose connected the right way, and without sharp bends or kinks that could stop or reduce water flow? See page 16.

4	Is the softener power cable connected to the	3--valve
	transformer? Is the transformer plugged into	brass
	an inside, 120V-60Hz electrical outlet? See
	page 20.
4	Be sure to restart the water heater. See page	plastic
	20.

5