SECTION 5

SERVICE TECH. INFORMATION

II

5A.TROUBLESHOOTING

MANUAL ADVANCE REGENERATION CHECK

This

check

verifies

proper

operation

of

the

valve

motor, brine tank

fill, brine

draw,

regeneration

flow

rates,

and

other

controller

functions.

Always

make

the

initial

checks,

and

the

manual

initiated

diagnostics.

3.Again press ON/OFF-HOLD to move the softener into backwash. Look for a fast flow of water from the drain hose.

ao An obstructed flow indicates a plugged top distrib- utor, backwash flow plug, or drain hose.

4.

NOTES: The faceplate display must show a steady time (not flashing). If an Error code shows, first press

the #1 SELECT button to enter the diagnostic display.

1.Press the ON/OFF-HOLD button and hold in for 3 seconds. RECHARGE NOW and FILLbegin to flash

.

(or clean backwash begins, if set) as the softener enters the fill cycle of regeneration. When FILL is on steady, remove the brinewell cover and, using a flashlight, observe fill water entering the tank.

a.If water does not enter the tank, look for an ob- structed nozzle, venturi, fill flow plug, brine tub- ing, or brine valve riser pipe.

Press ON/OFF-HOLD to move the softener into

fast rinse. Again look for a fast drain flow. Allow the softener to rinse for a few minutes to flush out

any brine that may remain in the resin tank from the brining cycle test.

To return the softener to service, press ON/OFF- HOLD.

BRINE VALVE

FLOAT SWlrlklG

CYCLE FLOW RATES (GALLONS PER MIN.)

...2'2,".,

 

FILL (flow to salt storage tank)

0.3

(1.1

liters)

 

BRINING

"_

.16

(.61

liters)

 

BACKWASH

(flow to drain)

1.8 (6.8

liters)

 

BRINE RINSE

l

.12

(.45

liters)

 

FAST RINSE

 

t.8

(6.8

liters)

 

2.After observing fill, press the ON/OFF-HOLD button to move the softener into brining. A slow flow of water to the drain will begin. Verify brine draw from the brine tank by shining a flashlight into the brinewell and observing a noticeable drop in the liquid level.

NOTE: Be sure a salt bridge is not preventing water with salt contact.

a.if the softener does not draw brine...

...nozzle and/or venturi dirty or defective.

...nozzle and venturi not seated properly on gasket.

...restricted drain (check drain fitting and hose).

...defective nozzle and venturi seal.

...other inner valve defect (rotor seal, rotor & disc, wave washer, etc.).

NOTE: If water system pressure is low, an elevated

drain hose may cause back pressure, stopping brine draw.

FREEBOARD MEASUREMENT

(Distance from top of resin tank to top of resin bed_

Resin Tank

FREEBOARD

7"-11"

1

Re_nBed

24

Page 24
Image 24
Kenmore 625.34867 owner manual Manual Advance Regeneration Check

625.34867 specifications

The Kenmore 625.34867 is a compact, high-efficiency dehumidifier designed to improve indoor air quality in homes and small spaces. This versatile appliance proves to be a valuable addition for those struggling with excess moisture, mold, and mildew, particularly in areas such as basements, bathrooms, and laundry rooms.

One of the standout features of the Kenmore 625.34867 is its robust moisture removal capacity, which is capable of extracting up to 50 pints of water from the air each day. This makes it an ideal choice for medium to large-sized rooms, ensuring a comfortable atmosphere while effectively preventing the detrimental effects of humidity.

Equipped with a user-friendly digital control panel, the Kenmore 625.34867 allows for effortless operation and monitoring. Users can easily adjust the desired humidity level, which can be set between 35% and 85%, to suit their preferences. Additionally, the dehumidifier features a 24-hour timer and multiple fan speeds, offering flexibility in its operation to match varying conditions throughout the day.

One noteworthy technology integrated into this model is the built-in humidistat. This smart feature continuously monitors the room's humidity levels, automatically turning the unit on or off to maintain the set humidity, thereby conserving energy and ensuring optimal performance.

The Kenmore 625.34867 is also designed with optimal drainage solutions in mind. It includes a removable water tank with a large capacity, which makes emptying infrequent and straightforward. For added convenience, users can opt for continuous drainage via a standard garden hose, eliminating the need to manually empty the tank.

In terms of portability, this dehumidifier is equipped with durable caster wheels that allow for easy movement from room to room. The ergonomic top handle contributes to its ease of transport, making it simple to adapt it to different spaces as needed.

Finally, the Kenmore 625.34867 is designed with safety in mind. It features an automatic shut-off function that activates when the water tank is full, preventing overflow and potential water damage. Combined with its energy-efficient operation, this dehumidifier stands as a practical solution for maintaining a healthy indoor environment, free from excessive moisture and its associated issues.