![ASSEMBLY](/images/new-backgrounds/200604/20060421x1.webp)
INSTALL REVERSE OSMOSIS FILTER
ASSEMBLY
The Reverse Osmosis Filter Assembly can sit upright or lay on it's side. When planning your installation, you need to allow adequate tubing lengths to be able to access the back of the Reverse Osmosis assembly in order to change the monitor battery. See Figure 11.
INSTALL STORAGE TANK
1.Apply thread sealing tape to the threads on the nipple at the top of the tank (max. 2 wraps). See Figure 12.
2.Locate the tubing connector. Tighten the tubing con- nector with a wrench onto the tank nipple
3.Do not connect the tube at this time. This will occur later in the assembly.
4.Place the storage tank next to the Reverse Osmosis Assembly. The tank can be placed upright or on its side.
Figure 11
Jr
/'j
//
//
i i tubing connector
tanknipp e
ge tank
Figure 12
Questions? Call The Kenmore Water Line
11