Unpack and Check | Shipment |
| ............................................................................. |
| 4 | |||||
What | Your | Reverse | Osmosis |
| System | Will | do | 5 | ||
Plan | Your | installation | .................................................................................. |
|
|
| ||||
Overview | and | Site | Preparation | ........................................................................... |
| 7 | ||||
Step | lqnstall | Supply | Water | Fitting | ........................................................................ | 8 | ||||
Step | 2qnstall | Reverse | Osmosis | Drain | ||||||
Step | 3qnstall Reverse Osmosis Filter Assembly | 11 | ||||||||
Step | 4qnstall | Storage | Tank | .............................................................................. |
|
| 11 | |||
Step | 5qnstall | Reverse | Osmosis | Faucet | ||||||
Step | Tubes | ................................................................................ |
|
|
| |||||
Step | Purge | System | ||||||||
How | Your | Reverse | Osmosis | Water | System | Works | ||||
Maintenance | ........................................................................................ |
|
|
|
|
| ||||
Specifications | .......................................................................................... |
|
|
|
|
| 22 | |||
Troubleshooting | ..................................................................................... |
|
|
|
|
| ||||
Exploded | View & Parts List |
| .......................................................................... |
|
Y Read all steps and guides carefully before installing and using your reverse osmosis system. Follow all steps exactly to correctly install. Reading this manual will also help you to get all the benefits from the reverse osmosis system.
V Do not attempt to use this product to make safe
drinking water from
not use the system on microbiologically unsafe water, or water of unknown quality without adequate disin- fection before or after the system. This system is certi- fied for cyst reduction and may be used on disinfec- ted water that may contain filterable cysts.
Y Check with your local public works department for plumbing and sanitation codes. You must follow their guides as you install the system. Follow your local codes if they differ with guides in this manual.
Y This system shall only be used for arsenic reduction on chlorinated water supplies containing detectable residual free chlorine at the system inlet. Water sys- tems using an inline chlorinator should provide a one minute chlorine contact time before the RO system.
V This system is acceptable for treatment of influent
concentrations of no more than 27 mg/L nitrate and 3 mg/L nitrite in combination measured as N and is cer-
tified for nitrate/nitrite reduction only for water sup- plies with a pressure of 280 kPa (40 psig) or greater.
Y The reverse osmosis system works on water pressures of 40 psi (minimum) to 100 psi (maximum). if your house water pressure is over the maximum, install a pressure reducing valve in the water supply pipe to the reverse osmosis system.
Y Do not install the reverse osmosis system outside, or
in extreme hot or cold temperatures. Temperature of
the water supply to the reverse osmosis system must be between 40°F and 100°F. Do not install on hot
water.
V Read the other limits (pH, hardness, etc.) in the speci- fications and be sure your water supply conforms.
V The reverse osmosis membrane contains a preserva- tive for storage and shipment. Be sure to purge as instructed on page 17 before using product water.
Questions? Call The Kenmore Water Line