|
| Can be selected |
| Added time to cycle | Added | |
| Options | What it does |
|
| Water† | |
| with |
|
| Gallons | ||
|
|
| Typical | Max | ||
|
|
|
| (Liters) | ||
|
|
|
|
|
| |
|
|
|
|
|
|
|
| High Temp |
|
|
|
|
|
| Raises the main wash temperature to | SmartWash® HE | Raises the main wash |
|
|
|
| improve cleaning. When used with |
|
| 0 - 2.6 | ||
| the Normal Wash cycle this will | Pots & Pans | temperature from 105°F | 35 | 45 | |
| (41°C) to 130°F or 135°F | (0 - 10.0) | ||||
| provide a little extra tough cleaning | Normal Wash |
|
| ||
| (54°C or 57°C). |
|
|
| ||
| capability, but not as much as the Pots |
|
|
|
| |
|
|
|
|
|
| |
| & Pans cycle. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Sani Rinse |
|
|
|
|
|
| This high temperature option sanitizes |
|
|
|
|
|
| your dishes and glassware in |
|
|
|
|
|
| accordance with National Sanitation |
|
|
|
|
|
| Foundation (NSF)/ANSI Standard 184 |
| Increases the main wash |
|
|
|
| for Residential Dishwashers. Certified |
|
|
|
| |
| SmartWash® HE | temperature from 105°F |
|
|
| |
| residential dishwashers are not |
|
| 0 - 2.6 | ||
| intended for licensed food | Pots & Pans | (41°C) to 130°F (54°C) | 60 | 90 | |
| and the final rinse from | (0 - 10.0) | ||||
| establishments. The Sani indicator | Normal Wash |
|
| ||
| 140°F (60°C) to 156°F |
|
|
| ||
| indicates at the end of the cycle |
|
|
|
| |
|
| (69°C). |
|
|
| |
| whether the Sani Rinse option was |
|
|
|
|
|
| successfully completed. If the |
|
|
|
|
|
| indicator does not activate, it is |
|
|
|
|
|
| probably due to the cycle being |
|
|
|
|
|
| interrupted. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Heated Dry |
|
|
|
|
|
| Turns the heat element on after the | Available with |
|
|
|
|
| wash cycle is completed. Use rinse | Turns the heat element |
|
|
| |
| any cycle |
|
|
| ||
| aid with or without the Heated Dry | on at the end of the | 32 | 32 | 0 | |
| except | |||||
| option for best drying results. Plastic | wash cycle. |
|
|
| |
| Quick Rinse |
|
|
| ||
| items are less likely to deform when |
|
|
|
|
|
| loaded in the top dish rack. |
|
|
|
|
|
|
|
|
|
|
|
|
†The maximum additional water used for any combination of options is 2.6 gal. (10.0 L).
Dishwasher Control Section
Delay Hours (on some models)
Use this option to run your dishwasher during
To delay the start
1.Select a wash cycle and options.
2.Press the delay button.
3.Press START/RESUME.
NOTE: Anytime the door is opened (such as, to add a dish), the START/RESUME button must be pressed again, to resume the delay countdown.
18
