Dynex 91000051 manual As required maintenance, Routine Maintenance Procedures

Routine Maintenance Procedures

•Replace the dispense (Wash) tubing.

•Replace the aspirate (Waste) tubing.

Note: The dispense tubing and aspiration tubing may need to be replaced more frequently than every six months, depending upon the frequency of use and the severity of operating conditions.

Contact DYNEX Technologies for information on replacement tubing.

•Replace the in-line hydrophobic filter.

If the system will not be used for a period of time, the system should be flushed with de-ionized water so that buffers and/or reagents used to wash the plates are not deposited on the Wash Head or other components of the system.

As required maintenance:

•Pump Calibration (page 74)

68 Opsys MW™ User’s Guide