Dynex 91000051 manual To unpack the components, Unpacking

Unpacking

To unpack the components:

1.Place the Opsys MW™ instrument in the position where it will be located for use.

2.Place the Wash Container, Waste Container and Foam/Aerosol Trap at the rear of the instrument.

3.Examine the packaging to be sure that the power cord and other materials have been removed. Please save packaging material for future use.

4.Verify that all of the materials listed above have been unpacked.

5.Inspect the components for damage. If damage is observed, contact your shipper or service representative immediately.

14 Opsys MW™ User’s Guide