Dynex 91000051 manual Dispense, Soak, Fill, Wash Protocol Operations, Description

Wash Protocol Operations

Operation	Description
Dispense	Dispenses a specified amount of fluid into the wells
	after aspirating the contents of the wells (i.e.
	wherever a DISPENSE step is added to a protocol,
	the OPSYS MW will automatically aspirate the
	wells before dispensing more fluid in order to
	prevent a well overflow). If a bottom wash is
	specified, the wash head is then lowered to the
	bottom wash position so that fluid will be aspirated
	from the bottom of the wells while fluid is being
	dispensed.
	Note: The dispense height
	for a particular plate type is
	specified during system
	configuration (page 30).
Soak	The contents of the wells are allowed to equilibrate
	for the specified number of seconds.
Fill	The wells are filled with a specified amount of fluid.

40 Opsys MW™ User’s Guide