How to operate your Friedrich
The controls will look like the following.
Control and Remote Control Operations
1TEMPERATURE SETTING
•These buttons control the temperature
of the room. The temperature can be set within a range of
60° F to 86° F, in increments of 1° F.
2 MONEY SAVER
1
2
3
4
6
Power
Temp 
Fan Speed
Timer Mode
4
Money
Saver
2
5
5
1
6
3
The fan stops when the compressor stops cooling.
•Approximately every 3 minutes the fan will turn on and sample the room air to determine if more cooling is needed.
3OPERATION MODE SELECTOR
•Everytime you push this button, it will rotate between the COOL, FAN and DRY modes.
4ON/OFF TIMER
•Push Timer button to advance setting from 1hr - 2hrs
OFF - You will usually use
•If unit is running, use Timer to set number of hours until
•For your sleeping comfort, once Time is set, the temperature setting will rise 2° F after 30 min, and once again after another 30min.
•Push Timer button to advance setting from 2 hrs....12 hrs maximum.
5POWER
•To turn the unit ON, push the button. To turn the unit OFF, push the button again.
•This button takes priority over all other buttons.
•When you first turn it on, the unit is on the High Cool mode and the temperature is set at 72° F.
6FAN SPEED
•Everytime you push this button it will rotate between the following fan speeds:
High (F3) 
Low(F1) 
Medium (F2) 
High (F3)
How to Insert Batteries
1.Remove the cover from the back of the remote control.
2.Insert two batteries.
•Be sure that the (+) and
•Be sure that both batteries are new.
3.
•Do not use rechargeable batteries. Such batteries differ from standard dry cells in shape, dimensions, and performance.
•Remove the batteries from the remote control if the air conditioner is not going to be used for an extended length of time.
6
