Manuals / Brands / TV and Video / VCR / JVC / TV and Video / VCR

JVC HR-S9500E, HR-S9500EH SET TV BRAND CODE, OPERATE TV

1 68

Download 68 pages, 1.92 Mb

34 EN

123

456

789

0

2

4

1

3

SPECIAL FEATURES (cont.)

Control Your TV Using

Additional Buttons

Use the NUMBER keys, and the button, button or ‰

button to select the TV’s channel.

●With televisions under Code 01, 02, 07, 10, 11, 14, 20,

23, 24, 25, 27, 33 or 35, the button corresponds to

the 1-digit/2-digit entry switching button (often labelled

– /– –) of your TV’s remote control.

●With televisions under Code 01, 28, 29 or 34, the button

corresponds to the 10 + button, and the ‰ button corre-

sponds to the 20 + button of your TV’s remote control.

NOTE:

The way these buttons are used is determined by your TV.

Use these buttons as instructed for your TV’s remote control.

SET TV BRAND CODE

1

Refer to the chart below. While holding down on

the recorder's remote control, enter your TV’s brand

code using the NUMBER keys, then press STOP.

Check if the TV's power goes off as it should. If it does,

try other operations (Z step 2).

●Once you have set the remote control to operate the

TV, you don't have to repeat this step until you

replace your remote control's battteries.

●JVC or SAMSUNG has more than one code. If the TV

does not function with one code, try entering another.

OPERATE TV

2

Press the corresponding button: , TV PROG +/–,

TV/VCR, TV +/– (Volume), (Muting), NUMBER

keys.

●For some brands of TV, you must press ENTER after

having pressed the NUMBER keys.

●To return the remote to video recorder control, set its

VCR/TV/SAT switch to VCR.

IMPORTANT

Although the provided remote control unit is compatible with

JVC televisions, as well as many other models, it may not work

with your TV, or in some instances, may have limited function

capability.

TV BRAND NAME CODE

JVC 01, 23, 24, 25

BLAUPUNKT 19

BRANDT 26

FERGUSON 27

FINLUX 30

FUNAI 32

LG/GOLDSTAR 18

GRAETZ 28

GRUNDIG 19

HITACHI 10

ITT 28

LUXOR 28

MITSUBISHI 03

MIVAR 29

NEC 20

NOKIA 31

NORDMENDE 26

PANASONIC 11

PHILIPS 02

SABA 26

SALORA 28

SAMSUNG 02, 12, 33, 34, 35

SELECO 28

SHARP 06

SONY 07

TELEAVIA 26

TELEFUNKEN 26

THOMSON 26

TOSHIBA 14

TV Multi-brand Remote

Control

Your remote control can operate the basic functions of your TV set.

In addition to JVC TVs, other manufacturer’s TVs can also be

controlled.

Before you start . . .

●Turn on the TV using its remote control.

●Set the remote control’s VCR/TV/SAT switch to TV.

STOP

TV PROG+/–

TV/VCR

TV +/–

NUMBER

VCR/TV/SAT

ENTER

Contents

Main HR-S9500E/EH ENGLISH VIDEO CASSETTE RECORDER EN INSTRUCTIONS Safety Precautions CAUTION WARNING MOISTURE CONDENSATION ABOUT HEAD CLEANING Connections SITUATE RECORDER TV To Connect To A TV With NO AV Input Terminals . . . To Connect To A TV With AV Input Terminals . . . S-VIDEO Connection You can obtain high-quality S-VHS pictures. pg. 48) For switching the TV's mode, refer to the instruction manual of your television. INITIAL SETTINGS Auto Set Up Auto Channel Set/Auto Clock Set/Auto Guide Program Number Set/Auto Video Channel Set TURN ON THE RECORDER SELECT COUNTRY If you are referring to the front display panel CONFIRM/SET VIDEO CHANNEL FINISH AUTO SET UP SELECT LANGUAGE If you are referring to the front display panel If you are referring to the on-screen display INITIAL SETTINGS (cont.) Auto Set Up results appear on the front display panel INFORMATION Language ACCESS COUNTRY SET SELECT COUNTRY SELECT LANGUAGE On-Screen Displays INITIAL SETTINGS (cont.) The superimposed indication on the TV screen tells you what the recorder is doing. ENABLE/DISABLE ON-SCREEN DISPLAY q6 Power Save Mode (HR-S9500E only) The Just Clock function ( SELECT POWER SAVE During Power Save, the display panel will be turned off. Colour System Set INFORMATION ON COLOUR SYSTEM TURN ON THE RECORDER SELECT COLOUR SYSTEM MODE About NTSC Playback Playback Usable cassettes LOAD A CASSETTE FIND PROGRAMME START POINT STOP PLAYBACK Playback Features Manual Tracking OVERRIDE AUTOMATIC TRACKING pg. 32). Skip Search To return to normal playback during a Skip Search, press PLAY. ADJUST TRACKING MANUALLY ACTIVATE DIGITAL TBC/NR Digital 3R ACCESS MODE SET SELECT DIGITAL 3R SET Normally it is recommendable to keep "DIGITAL 3R" set to "ON". ACTIVA TE SPA TIALIZER Next Function Memory Repeat Playback ACTIVATE REPEAT PLAYBACK STOP PLAYBACK TimeScan "TIME SCAN AUDIO" must be set to "ON", or the sound will not be heard in TimeScan mode. ( pg. 19) The audio will not synchronize with the video in TimeScan modes. In Pause mode 3 seconds (approx.) of audio will be played back repeatedly. ( TimeScan If you don't want to hear TimeScan audio, set "TIME SCAN AUDIO" to "OFF" (See below). 4 TimeScan Audio 1 2 LOAD A CASSETTE CHOOSE A PROGRAMME PAUSE/RESUME RECORDING STOP RECORDING Accidental erasure prevention Features Record One Programme While Watching Another If your recorder is connected to the TV via AV connection, . . . SELECT CHANNEL TO WATCH Elapsed Recording Time Indication SELECT S-VHS MODE Retake ENGAGE RECORD-PAUSE RESUME RECORDING Receiving Stereo And Bilingual Programmes ACCESS HI-FI REC LEVEL CONTROL SCREEN SELECT MODE ADJUST AUDIO RECORDING LEVEL B.E.S.T. Picture System Preparation RECORDING (cont.) SELECT B.E.S.T. MODE Recording Playback ACCESS SHOWVIEW SCREEN ENTER SHOWVIEW NUMBER ACCESS SHOWVIEW PROGRAM SCREEN SHOWVIEW Timer Programming TIMER RECORDING SHOWVIEW SHOWVIEW 12345678 SET TAPE SPEED Timer Warning Express Timer Programming ACCESS SHOWVIEW ACCESS PROGRAMME ENTER PROGRAMME START TIME ENTER PROGRAMME STOP TIME ENTER CHANNEL POSITION SET VPS/PDC MODE Z ENGAGE RECORDERS TIMER MODE Satellite Tuner Users Check, Cancel And Replace Programmes DISENGAGE TIMER MODE ACCESS PROGRAM CHECK SCREEN/DISPLAY ACCESS PROGRAM SCREEN/ DISPLAY To cancel or replace a programme... Auto Timer SELECT MODE The Auto SP . Auto SPLP Timer Automatic Satellite Programme SELECT AV2 SELECT MODE ENGAGE AUTO SATELLITE PROG REC MODE Remote A/B Code Switching REMOVE POWER SUPPLY Remote Control Functions SPECIAL FEATURES (cont.) Control Your TV Using Additional Buttons SET TV BRAND CODE OPERATE TV TV Multi-brand Remote Control Satellite Tuner Multi-Brand Remote Control SET SATELLITE TUNER BRAND CODE OPERATE SATELLITE TUNER Preparation For Editing Editing Mode Setting After you finish editing, be sure to set "EDIT" back to "OFF". SELECT EDIT MODE Advantages Of S-VHS Video Recorders Edit From A Camcorder MAKE CONNECTIONS If the camcorder has no S-VIDEO output connector... If the camcorder has an S-VIDEO output connector... SET RECORDERS INPUT MODE Edit To Or From Another Video Recorder SET RECORDING DECKS INPUT MODE SET EDIT MODE START SOURCE PLAYER START RECORDING DECK AV2 SELECT Setting 1 2 5 3 4 Insert Editing SET INPUT MODE LOCATE END POINT RESET THE COUNTER ENGAGE INSERT EDITING START EDITING END INSERT EDITING FOR AV INSERT EDITING Random Assemble Editing PREPARE FOR EDITING LOAD SOURCE CASSETTE SET EDIT MODE START SOURCE PLAYBACK LOCATE EDIT-IN POINT LOCATE EDIT-OUT POINT PREPARE RECORDING DECK START R.A. EDIT END R.A. EDIT Audio Dubbing SET INPUT MODE ENGAGE AUDIO DUBBING START DUBBING END AUDIO DUBBING ACCESS JLIP ID NO. SET SET JLIP ID NUMBER Connection To A Satellite Tuner SYSTEM CONNECTIONS Refer to the instructions supplied with your satellite tuner. SELECT INPUT MODE CONNECT DECODER Connecting/ Using A Decoder Connecting/ Using A Stereo System SYSTEM CONNECTIONS (cont.) When listening to sound through the connected stereo system, turn the TVs volume down completely. CAUTIONS: ACCESS VIDEO CHANNEL SET MODE Video Channel Set Tuner Set ACCESS COUNTRY SET SELECT COUNTRY SELECT LANGUAGE Auto Channel Set PERFORM AUTO CHANNEL SET VIEW CONFIRMATION Storing Channels Manually SELECT BAND (Ex.) To store in position 12. INPUT CHANNEL ENTER NEW CHANNEL INFORMATION ACCESS CONFIRMATION Change Station Channel Position SELECT ITEM SELECT NEW POSITION SELECT ITEM DELETE CHANNEL SELECT STATION NAME CHARACTER ENTER NEW CHARACTER * Set Stations (B) SELECT ITEM TV Station And ID List SELECT CHANNEL TO FINE-TUNE ACCESS MANUAL CHANNEL SET SCREEN PERFORM TUNING Fine-Tuning Channels Already Stored SHOWVIEW Setup When timer-programming with S When you wish to timer-record a satellite programme with S . Guide Program Number Set Clock Set SET JUST CLOCK SET CLOCK DATA SOURCE CHANNEL POSITION START CLOCK OPERATION TROUBLESHOOTING POWER TAPE TRANSPORT RECORDING PLAYBACK TIMER RECORDING OTHER PROBLEMS QUESTIONS AND ANSWERS PLAYBACK RECORDING TIMER RECORDING EN 63 INDEX # ^ &$ %!9 0 FRONT VIEW 1 2 3 54 6 7 INDEX (cont.) 1 !0 $%9 #@ VCR REMOTE CONTROL @ $ E i SPECIFICATIONS Page HR-S9500E/EH * Auto Set Up pg. 49) as required. pg. 50), clock setting ( BEFORE YOU START PLEASE MAKE SURE THAT: n n n n