JVC HR-S9500EH Language Code, Via the provided RF cable only RF connection, Your Video Channel

3

SELECT LANGUAGE

Press OK. The Language Set display appears on the front display panel and/or on the screen.

If you are referring to the front display panel

Press %Þ to select your language code.

Language Code
ENGLISH	: 01	NEDERLANDS : 06
DEUTSCH	: 02	SVENSKA		: 07
FRANCAIS	: 03	NORSK		: 08
ITALIANO	: 04	SUOMI		: 09
CASTELLANO : 05		DANSK		: 10
(Ex.) DEUTSCH is selected for SUISSE
International telephone			Language code
country code

		EN	7
5	CONFIRM/SET VIDEO CHANNEL
	If you have connected the video recorder to your TV
	via the provided RF cable only (RF connection)
	The UHF channel that is shown on the display panel is
	your Video Channel.
	To view picture signals from the video recorder, set your
	TV to the Video Channel. — Refer to the instructions
	supplied with your TV set for how to do this.

c	If you have connected the video recorder to your TV via
	both the provided RF cable and a 21-pin SCART cable
	(AV connection), or via the provided RF cable, the
	provided S-Video cable and an audio cable (S-VIDEO
	connection)
	You do not need the video channel so you have to set
	the video channel to off.
	Press TV PROG – until the display panel shows
	"_OUT– –" to set the Video Channel to off.

If you are referring to the on-screen display

Press %Þ to move the highlight bar (pointer) to the language of your choice.

DANSK

SUOMI

NORSK

SVENSKA

NEDERLANDS

CASTELLANO

ITALIANO

FRANCAIS

DEUTSCH ENGLISH [5°] = [MENU] : ENDE

(Ex.) DEUTSCH is selected

To view picture signals from the video recorder, set

your TV to its AV mode. — Refer to the instructions

supplied with your TV set for how to do this.

FINISH AUTO SET UP

6 Press OK and refer to page 8 to check the results.

4

PERFORM AUTO SET UP

Press OK.

"Auto" appears on the display panel and blinks; do NOT press any button on the recorder or remote control until the display panel shows either the display as illustrated in step 5 or "– –:– –".

●If "– –:– –" appears on the display panel, refer to page 8.

●If you are using the on- screen display, the

AUTO SET screen will			AUTO SET
appear. As Auto Set Up			PLEASE WAIT
progresses, the "	"
mark on the screen			+	+	+
moves from left to	0
right.
		[MENU] : EXIT
	Beginning
					End

NOTES:

●Auto channel set function takes place first; it assigns automatically all receivable stations in your area.

●Auto clock set function sets the clock automatically by reading the clock setting data from a station transmitting a PDC signal while auto channel set is being performed.

●During auto channel set, the recorder recognizes each station name of the detected stations and stores them in the recorder's memory, then automatically sets SHOWVIEW assigned Guide Program number for those stations according to the broadcast area.

●In the area where no TV station transmits a PDC signal, the recorder can perform neither auto clock set nor auto Guide Program number set.

●For RF connection users: The video recorder detects the channels which are not occupied by local stations and selects one channel automatically for your Video Channel that is located in the middle of more than 5 vacant channels.

●If there is a power cut, or if you press or MENU while Auto Set Up is in progress, Auto Set Up will be interrupted; be sure to turn off the recorder power once and try again from step 1.