SPECIAL
FEATURES
E
N
33
Remote
Control
Functions
NUMBER "1" | 1 | 2 | 3 |
|
| 2 | |
| 4 | 5 | 6 |
| "2" | 8 | 9 |
NUMBER | 7 | ||
| 0 | 4 | |
|
| ||
1 |
|
|
|
STOP
Remote A/B Code Switching
The remote control is capable of controlling two JVC video recorders independently; one set to respond to the remote control’s A code control signals and another set to respond to B code control signals. The remote control is preset to send A code signals because your video recorder is initially set to respond to A code signals. You can easily modify your video recorder to respond to B code signals.
REMOVE POWER SUPPLY
1 Unplug the mains power cord from the mains outlet.
SET REMOTE CONTROL CODE
2 While holding down A/B on the remote control, press the NUMBER key "2" and then press STOP.
RE-SUPPLY POWER
3 Plug the mains power cord back into the mains outlet.
TURN THE RECORDER ON
4 Press 
on the remote control. The recorder will now only respond to B code signals.
3
A/B
NOTE:
To set the recorder back to respond to A code signals, repeat the same procedure as shown above except pressing NUMBER key "1" instead of "2" in step 2.
