JVC HR-S9500EH specifications Adjust Audio, Hi-Fi Audio Recording Level Control

RETURN TO NORMAL SCREEN

EN23

Hi-Fi Audio Recording Level Control

Your recorder allows manual adjustment of the Hi-Fi audio recording level. Normally the preset audio recording level is satisfactory, but if the sound you are going to record is too loud or too low, adjust the audio recording level while referring to the recorder's audio level meters.

	ACCESS MAIN MENU
	SCREEN
1 Press MENU.
	ACCESS HI-FI REC LEVEL
2	CONTROL SCREEN
	Press %Þto move the highlight bar (pointer) to “REC
	LEVEL CTL”, then press OK or %.
	SELECT MODE
	Move the highlight bar	HI-FI REC LEVEL CONTROL
	(pointer) to “MANUAL” by
			MANUAL
3 pressing %Þ, then press
	OK or%.		PRESET
		MIN	+	MAX
		[5°] =
		[MENU] : EXIT
	ADJUST AUDIO
4	RECORDING LEVEL
	Press % or Þ.

●Press %or Þ briefly 5 times to move the on-screen's audio levels by one division on the scale. To move the audio levels faster, keep %or Þ pressed.

●Adjust the recording level while watching the recorder's audio level meters. Set the level so that maximum volume causes the meters to vary between 0dB to 4dB.

5 Press MENU.

Receiving Stereo And Bilingual Programmes

Your recorder is equipped with a Sound-Multiplex decoder (A2) and, if you own the HR-S9500EH, a Digital stereo sound decoder (NICAM) as well, making reception of stereo and bilingual broadcasts possible.

When the channel is changed, the type of broadcast being received will be displayed on the TV screen for a few seconds.

Type of Broadcast		On-screen Display
Being Received
A2	Stereo	ST
A2	Bilingual	BIL
Regular Monaural		(none)
*NICAM Stereo		ST NICAM
*NICAM Bilingual		BIL NICAM
*NICAM Monaural		NICAM

*Available with HR-S9500EH only.

●To listen to a stereo programme, press AUDIO until "" and

"" appear on the front display panel or "HIFI L R" appears on the screen.

●To listen to a bilingual programme, press AUDIO until "" or "" appears on the front display panel, or "HIFI L " or "HIFI R" appears on the screen (as required).

●To listen to the Standard (regular monaural) audio while receiving a NICAM broadcast, press AUDIO until "NORM" appears on the front display panel or on the screen. (HR-S9500EH only)

NOTE:

"O.S.D." must be set to "ON" or the on-screen displays will not appear (☞ pg. 10).

To Record Stereo And Bilingual Programmes (A2)

●Stereo programmes are automatically recorded in stereo on the Hi-Fi audio track (with the normal audio track recording mixed L and R channel sound).

●Bilingual programmes are automatically recorded in bilingual on the Hi-Fi audio track. The main soundtrack will be recorded on the normal audio track.

To Record NICAM Stereo And Bilingual Programmes (HR-S9500EH only)

The NICAM audio programme will be recorded on the Hi-Fi audio track, and the Standard audio programme on the normal audio track.

NOTE:

Noise will increase if the recording level is too low, while distortion will increase if the level is too high.

NOTES:

●If the quality of stereo sound being received is poor, the broadcast will be received in monaural with better quality.

●Before playing back a programme recorded in stereo, or a bilingual programme, refer to "Soundtrack Selection" (☞ pg. 17).