JVC HR-S9500EH specifications Edit From Camcorder, Recorder, Player

Edit From

A Camcorder

1	2	3
		2
4	5	6
7	8	9
NUMBER "0"	0	4
		TV PROG
1

NOTES:

●All necessary cables can be obtained from your dealer.

●You can also use another video recorder as the player instead of a camcorder.

AIf the camcorder has no S-VIDEO output connector...

Recorder

		To rear panel PAUSE/
VIDEO	AUDIO input	R.A. EDIT connector
input	Audio Cable
	(not provided)
Video Cable (not provided)		Mini-Plug Cable
		(not provided)
	VIDEO OUT	(JVC camcorder
Player		only)

Camcorder

AUDIO OUT

EDIT

EN37

You can use a camcorder as the source player and your video recorder as the recorder.

1		MAKE CONNECTIONS
		A If the camcorder has no S-VIDEO output connector...
		... connect the camcorder’s AUDIO/VIDEO OUT
		connectors to the recorder’s front panel AUDIO/
		VIDEO input connectors.
		B If the camcorder has an S-VIDEO output connector...
		... connect the camcorder’s S-VIDEO OUT and
		AUDIO OUT connectors to the recorder’s front
		panel S-VIDEO and AUDIO input connectors.
		● When using a monaural camcorder, connect its
		AUDIO OUT connector to the AUDIO L input
		connector on your recorder.
		● When a Master Edit Control-equipped JVC camcorder
		is used, the camcorder is capable of controlling the
		recorder. Refer to the camcorder’s instruction manual
		for operating procedure.
2		SET RECORDER’S INPUT MODE
	Press NUMBER key “0” and/or TV PROG to select "F-1"
		for the AUDIO/VIDEO input connectors, or "S-1" for the
		AUDIO/S-VIDEO input connectors, depending on the
		connectors being used.
3		SET EDIT MODE
	See "Editing Mode Setting" on page 36.
4		START CAMCORDER
	Engage its Play mode.
5		START RECORDER
	Engage its Record mode.

BIf the camcorder has an S-VIDEO output connector...

Recorder

		To rear panel PAUSE/
S-	AUDIO input	R.A. EDIT connector
VIDEO	Audio Cable (not provided)
input
	S-Video Cable (provided)	Mini-Plug
		Cable
		(not provided)

	S-VIDEO OUT	(JVC
		camcorder
Player
		only)

Camcorder

AUDIO OUT

EDIT