JVC HR-S9500EH Activate Spatializer, Soundtrack Selection, During Playback, Track USE

ACTIVATE REPEAT PLAYBACK

2 Press PLAY and hold for over 5 seconds, then release. ● The Play indicator ( ) on the display panel blinks slowly. ● The tape plays 50 times automatically, and then stops.

STOP PLAYBACK

3 Press STOP at any time to stop playback.

Press PLAY.

1

EN 17

Repeat Playback

Your video recorder can automatically play back the whole tape 50 times repeatedly.

START PLAYBACK

Spatializer®

This feature expands sound field when you play back any stereo source or view a stereo programme while recording it. *Spatializer® has no effect on recording quality.

1

ACTIVATE SPATIALIZER®

Press SPATIALIZER; the current setting will be displayed on the screen for about 5 seconds. Pressing SPATIALIZER while the screen shows the display changes the setting.

●To view a stereo programme such as movies or

music, select "SPATIALIZER " to create more spacious sound.

●To view a monaural programme, select "SPATIALIZER[ST" which simulates a stereo effect.

●Select "SPATIALIZER OFF" to turn off Spatializer® if the sound becomes unnatural with either

"SPATIALIZER " or "SPATIALIZER[ST" selected.

●If your TV is equipped with 3D-PHONIC and if you use both Spatializer® and 3D-PHONIC at the same time, the sound may become unnatural; set either function to "OFF".

●The setting will remain effective even though you turn on/off the recorder.

NOTES:	NOTE:
● Spatializer®is effective only with a stereo TV.	Pressing PLAY, REW, FF or PAUSE also stops Repeat Playback.
● You can change the Spatializer® setting even though "O.S.D."
is set to "OFF".	Next Function Memory
● The setting cannot be changed during search, still, frame-by-
frame playback or slow motion mode.	You can set your recorder's power to go off automatically after
● When this recorder is used as the player for editing, the
	the tape is fully rewound. Before starting, make sure the
recorded audio will correspond to the Spatializer® setting.
	recorder is in the Stop mode.
	For Automatic Power Off After Tape Rewind . . .
	. . . press REW, then press	within 2 seconds.

Soundtrack Selection

Your video recorder is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select.

During Playback

Pressing AUDIO on the remote control changes the soundtrack being played back as follows:

TRACK					USE
Recorder's Front Panel	On-Screen Display
+			HI FI		For Hi-Fi stereo tapes
	L			R
	L		HI FI		For main audio of Bilingual tapes
			HI FI		For sub audio of Bilingual tapes
				R
NORM		NORM			For audio-dubbed tapes
+ + NORM			HI FI		For audio-dubbed tapes
		NORM

NOTES:

●" + " should normally be selected. In this mode, Hi-Fi stereo tapes are played back in stereo, and the normal audio track is played back automatically for tapes with only normal audio.

●For instructions on recording stereo and bilingual programmes, refer to page 23.

●"O.S.D." must be set to "ON" or the on-screen displays will not appear (☞ pg. 10).