Dynex 91000051 manual Returning a Washer for Service, Equipment In Transit, Equipment Declaration

Returning a Washer for Service

EQUIPMENT IN TRANSIT

IMPORTANT: Please include a copy of this form with each instrument. If your instrument contains a hard drive, please retain back-up copies of any stored files.

Failure to do so may result in the loss of those files.

Return Authorization Number: ___________

Contact Technical Service, DYNEX Technologies phone: (800) 288-2354 or (703)631-7800 ext. 1440 fax: (703) 631-7816

Equipment:__________

Serial Number: _____________

__________________________________________________________________

EQUIPMENT DECLARATION

Clearly indicate fault condition or reason for return.

________________________________________________________

CERTIFICATE OF DECONTAMINATION

I certify that the equipment described above has been disinfected/decontaminated* and is clean, dry and fit for transport.

Signed:

Title:

Date: _ ________________

(DYNEX Technologies reserves the right to refuse improperly cleaned equipment)

Shipping Address: DYNEX Technologies, Inc.

Attn.: (Above return number)

14340 Sullyfield Circle

Chantilly, VA 20151-1683

*Suggested decontamination methods:

Readers- Wash all surfaces with a 10% Hypochlorite solution, Follow that with a mild detergent solution.

Washers- Please follow the “Decontamination Procedure” found in the back of the manual.

Figure 10. Equipment in Transit Form

84 Opsys MW™ User’s Guide