Dynex 91000051 manual Selecting Clean, Configuring the System

Configuring the System

Selecting Clean

The CLEAN command enables the washer to be cleaned automatically at a specified interval.

1. Scroll right to display the next section:

Select option

CLEAN

2. Select CLEAN. The display will read:

Auto Clean?

YES NO

3.Select YES if you want periodic automatic cleaning. The display will read:

Interval (Hrs) 1

4.Enter the desired interval using the up/down scroll keys and press

ENTER.

Note: The minimum interval is 1 hour, and the maximum interval is 9 hours.

The display will read:

Fluid Volume? 2500

5. Enter the desired volume of fluid to be dispensed.

Note: A cleaning volume ranging from 50 to 9,999 microliters can be entered. Follow the instructions on page Error! Bookmark not defined. for refilling the wash container.

6. Press ENTER. The display will read:

Select option

CLEAN

Opsys MW™ User’s Guide 37