Dynex 91000051 manual Copying a Wash Protocol, To copy a wash protocol

Copying a Wash Protocol

Copying a Wash Protocol

An existing wash protocol can be copied to another program number. If a wash protocol is already in that location, it will be overwritten.

To copy a wash protocol:

1.Display the main menu:

1:NAME_01

SETUP PROGRAM

2.Use the up and down scroll keys to select the wash protocol to be modified (or enter the protocol number using the keypad). The display will read:

4: NAME_04

SETUP PROGRAM

3.Select PROGRAM. If the wash protocol is password protected, the display will read:

Enter password

4. Enter the Password using the keypad and press ENTER.

Note: If the Password is entered incorrectly an error message is displayed. The operator is allowed three attempts to enter the password. After the third attempt, the main menu will be displayed.

5. After a password is successfully entered, the display will read:

Edit name
4: NAME_04	COPY

6. Select COPY. The display will read:

Copy to? 7

Note: The protocol number that is displayed represents the first free protocol number, if any are available.

Opsys MW™ User’s Guide 61