Dynex 91000051 manual To create a new wash protocol header, Creating a New Wash Protocol

Creating a New Wash Protocol

To create a new wash protocol header:

1.Display the main menu.

1:- - - - - - - - - -

SETUP PROGRAM

2.Use the up or down scroll keys to display the protocol number (or use the keypad to enter the protocol number) that is to be created:

6: - - - - - - - - - -

SETUP PROGRAM

Note: Dashes will be displayed if a protocol has not yet been named.

3.Select PROGRAM. The name of the wash protocol is displayed in the lower line:

Enter name

- - - - - - - - - -

4.Use the keypad to enter the protocol name (up to 9 characters) and press ENTER. The display will read:

Password?

YESNO

Note: Refer to page 24 for instructions on entering alphanumeric characters.

5.Select YES if the protocol is to be password protected. The display will read:

Enter password

********

Note: If NO is selected, the Select plate prompt (Step 7) will be displayed.

6.Enter the password, (up to eight numeric characters) and press ENTER. The display will read:

Confirm password

********

42 Opsys MW™ User’s Guide