Dynex 91000051 manual Installing the Wash Head

Installing the Wash Head

Installing the Wash Head

The Wash Head must be located on the Wash Head Arm. To install the Wash Head:

1.Position the Arm over the Purge Reservoir portion of the Plate Holder.

2.Place the Wash Head on the two Arm Pins, being careful to properly seat the Wash Head on the support pins.

3.Level the Wash Head in relation to the Plate Holder and tighten the two thumbscrews at the front of the Wash Head / Arm Assembly.

Opsys MW™ User’s Guide 19