Dynex 91000051 manual To specify a Dispense within a Move, Creating a New Wash Protocol

Creating a New Wash Protocol

To specify a Dispense (within a Move):

Note: A Dispense or Aspirate must be performed within a Move cycle.

1. Select DISPENSE. The display will read:

Fluid volume? 350

2. Use the keypad to enter the volume of fluid to be dispensed.

Note: A volume ranging from 50 to 999 microliters can be entered.

3.Press ENTER. If a bottom wash is specified for the plate being used, the display will read:

Bottom Wash? NO

YESNO

Note: If the protocol requires bottom washing, that must first be specified in the plate definition used in the protocol.

If a bottom wash is not specified for the plate being used or if NO is selected for the Bottom Wash? prompt, the display will read:

Select option

ASPIRATE DISPENSE

4.Select YES if a bottom wash is to be included. The display will read:

Fluid volume? 350

5.Use the keypad to enter the volume of fluid to be dispensed during the bottom wash.

Note: A volume ranging from 50 to 999 microliters can be entered.

Opsys MW™ User’s Guide 49