Dynex 91000051 manual To specify a Fill within a Move, Creating a New Wash Protocol

Creating a New Wash Protocol

To specify a Fill (within a Move):

Note: A Fill must be performed within a Move cycle.

1. Scroll right to display the next selection. The display will read:

Select option

SOAK FILL

2. Select FILL. The display will read:

Fluid volume? 50

3.Use the keypad to enter the volume of fluid to be dispensed during well filling.

Note: A volume ranging from 50 to 300 microliters can be entered.

4. Press ENTER. The display will read:

Select option

SOAK FILL

52 Opsys MW™ User’s Guide