Caller Identification
Thisfeature allows you to identify incoming calls and accept or reject
them.The caller’s phone number, and name if stored in Phonebook,
willbe displayed.
Note:Caller Identification may not always be available.
Earpiece Volume Control
Thevolume level may be adjusted during a call:
Useato decrease the volume
Usebto increase the volume
Volumecontrol for Personal Handsfree accessory is adjusted in the
samemanner.
Locking the Phone
Withthe Phone Lock enabled you will be restricted to answer
incomingcalls and make emergency calls only. The Phone Lock
Codeis factory set to “0000”.
1FromIdle mode press Q, select Phone Menu
>Security > Phone Lock and press Q
2Enterthe 4-digit code and press Q
Thephone will be locked and the lock icon (O) will
bedisplayed.

Unlocking the Phone

Torestore normal operation, enter your Lock Code and press Q.
Thelock icon will be removed from the display. However, once you
turnthe phone off and on again you will need to re-enter the Lock
Code,and when the correct code has been entered Ok will be
displayed.Press Q.

Disabling Phone Lock

Thephone must be unlocked before the phone lock can be disabled.
1FromIdle mode press Q, select Phone Menu > Security >
PhoneLock and press Q
2SelectDisable press Q
3Enterthe 4-digit code and press Q
10
BasicOperation