Basic Operation

Basic Operation

Switching the Phone On/Off

To switch the phone on or off.

Press and hold E to switch power on

A greeting will be displayed and then the phone will go into Idle mode.

Press and hold E to switch power off

Making a Call

Ensure that the phone is switched on, the network operator logo is displayed and the signal strength meter shows network coverage is available in the current area.

1Enter area code and phone number

2Press D

International Dialling

Using the automatic international access code (+) you will be able to dial international numbers without having to know the code for the international exchange.

If the international number is known then it can be entered in the normal fashion followed by the area code and phone number.

1Press and hold 0 until + is displayed

2Use e to cycle through the abbreviated international names and press Q to select the required code

3Enter area code and phone number

4Press D

Note: Many countries include an initial “0” in the area code. This should, in most cases, be omitted when dialling international numbers. If you have difficulties making international calls, contact your Service Provider.

8

Page 12
Image 12
Panasonic EB-GD95 operating instructions Basic Operation, Switching the Phone On/Off, Making a Call, International Dialling