Kenmore 665.1327 Standard Adjuster, Removable Top Rack, To remove the rack, To replace the rack

Models: 665.1327

1 80
Download 80 pages 29.58 Kb
Page 14
Image 14
Standard Adjuster

Standard Adjuster

You can raise or lower the top rack to fit tall items in either the top or bottom rack. Adjusters are located on each side of the top rack. Raise the top rack to accommodate items up to 9" (22 cm) in the top rack and 13" (33 cm) in the bottom rack, or lower the top rack to accommodate items up to 11" (28 cm) in both the top and bottom racks.

1. To raise, remove rack and slide lower wheels into the rails as directed in “Removable Top Rack” section.

2. To lower, remove rack and slide upper wheels into the

rails as directed in “Removable Top Rack” section.

Removable Top Rack

The removable top rack allows you to wash larger items such as pots, roasters, and cookie sheets in the bottom rack.

IMPORTANT: Remove dishes prior to removing the top rack from dishwasher.

To remove the rack

1.To gain access to the track stops, pull the upper rack forward about halfway out of the tub.

2.To open, flip the track stop toward the outside of the tub.

3.After opening both track stops, pull top rack out of the rails.

Track stop closed

Track stop open

4.Close track stops and slide the tracks back into the dishwasher.

To replace the rack

1.Gently pull tracks forward in dishwasher until they stop. Open track stops.

2.Place the back wheels on each side of the rack into the track slot and roll them back into the tracks, but do not push the rack all the way into the tub.

3.Insert front rack wheels on each side of the rack into the track slots.

4.Slide rack into the dishwasher. The stops will automatically close when rack enters dishwasher.

14

Page 14
Image 14
Kenmore 665.1327 manual Standard Adjuster, Removable Top Rack, To remove the rack, To replace the rack