Kenmore 665.75029, 665.72024, 665.72022, 665.72029, 665.75022, 665.75025 manual Prepare Oven

Prepare Oven:

•Remove the broiler pan, grid, cookware and bakeware and, on some models, the temperature probe from the oven.

Remove any foil from the oven because it may burn or melt, damaging the oven.

Remove oven racks to keep them shiny and easy to slide. See "General Cleaning" for more information.

Hand clean inside door edge and the 11/2in. (3.8 cm) area around the inside oven cavity frame, being careful not to move or bend the gasket. This area does not get hot enough during self-cleaning to remove soil. Do not let water, cleaner, etc. enter slots on door frame. Use a damp cloth to clean this area.

Wipe out any loose soil to reduce smoke and avoid damage. At high temperatures, foods react with porcelain. Staining, etching, pitting or faint white spots can result. This will not affect cooking performance.

Prepare Cooktop and Storage Drawer.

•Remove plastic items from the cooktop because they may melt.

•Remove all items from the storage drawer.

How the Cycle Works

IMPORTANT: The heating and cooling of porcelain on steel in the oven may result in discoloring, loss of gloss, hairline cracks and

popping sounds.

The LOGI-CLEAN TM Self-Cleaning cycle is a "one-touch"step that uses very high temperatures, burning soil to a powdery ash.

"SEnS" setting will automatically determine the length of cleaning time. Maximum clean time is 4 hours 30 minutes and minimum is

2hours.

The oven will automatically shut off once it is clean. The door will not unlock until the oven cools.

The soil level can be manually set to light, average or heavy soil levels by continuously pressing LOGI-CLEAN.

To Set:

•Press twice for light soils, and "SoilL" will appear on the display.

•Press three times for average soils, and "SoilA" wiU appear on the display.

•Press four times for heavy soils, and "SoilH" will appear on the display.

Once the oven has completely cooled, remove ash with a damp cloth.

The oven light will not work during the Self-Cleaning cycle.

To Self-Clean:

Before self-cleaning, make sure the door is closed completely or it will not lock and the cycle will not begin.

1.Press LOGI-CLEAN.

2.Press START/ENTER.

The oven door will lock in 6 seconds and "LOCKED", the start time and stop time will appear on the display. The door will

not unlock until the oven cools. The cycle time includes a 30 minute cool down time

When the cycle is complete and the oven cools, "End" will appear on the display and "LOCKED" will disappear.

3.Press any pad to remove "End" or open the oven door.

4.Close door.

The time of day will appear on the display.

To Delay Start Self-Clean:

Before delay starting Self-Clean, make sure the clock is set to the correct time of day. See "Clock" section. Also, make sure the

door is closed completely or it will not _ock and the cycle will not begin.

1.Press LOGI-CLEAN.

2.Press DELAY START.

Press the HOUR/MIN "up" or "down" arrow pad to set time of day to start the Self-Cleaning cycle.

3, Press START/ENTER.

The start time is automatically calculated and displayed. The door will automatically lock and "LOCKED", "DELAY" and the stop time will also appear on the display.

When the start time is reached, the oven will automatically turn on.

When the cycle is complete and the oven cools, "End" will appear on the display and "LOCKED" will disappear.

4.Press any pad to remove "End" or open the oven door. 5, Close door.

The time of day will appear on the display.

To Stop Self-Clean any time:

Press OFF/CANCEL, and "cln", "ON", "cool" and "LOCKED" will appear on the display until the oven cools. Then "End" will appear and the door will unlock.

18