Kenmore 665.72024 manual Cooktop USE, Control Knobs, To Set, Power Burner, To Lock/Unlock Cooktop

COOKTOP USE

Control Knobs

Fire Hazard

Do not let the burner flame extend beyond the edge of the pan.

Turn off all controls when not cooking.

Failure to follow these instructions can result in death or fire.

Electric ignitors automatically light the surface burners when control knobs are turned to LITE,

Before setting a control knob, place filled cookware on the grate. Do not operate a burner using empty cookware or while the grate is vacant.

To Set:

1.Push in and turn knob counterclockwise to L_TE.

All four surface burners will click, Only the burner with the control knob turned to LITE will produce a flame.

2.Turn knob anywhere between HI and LO. Use the following

chart	as a guide when				setting heat levels.
,,		,,, i	,,	,,,		,,	i,,		,,
SETTING					RECOMMENDED						USE
i	H		m	,	i						w
LITE					•		Light the burner,
HI					•		Start	food		cooking,
					•		Bring liquid			to a boil
Mid-range					•		Hold	a rapid bolt.
(between		HI and LO)			•		Quickly		brown or sear food.
					•		To fry chicken.
					•		Maintain a slow boil.
					•		Fry or saute foods.
					•		Cook	soups, sauces and gravies.
LO					•		Keep food			warm.
					•		To simmer.
Power	Burner				•		Provide		highest		heat setting
(Jefffront		burner)
SURESIMMER			TM		•		Provide		lowest		simmer/heat
(right rear burner)							setting.
					•		Melt	chocolate			or butter.

REMEMBER: When range is in use or during the	I
Self-Cleaning cycle, the entire cooktop area may
become hot.

Power Burner

The left front burner is designed to give ultra-high power when it is fully on, It can be used to rapidly bring liquid to a boil and to cook large quantities of food,

Cooktop Lockout

The Cooktop Lockout prevents unintended use of the surface burners. When the cooktop is locked out, the surface burners

cannot	be turned on by the control				knobs.			_
The cooktop		will	remain locked after a power failure if it was					Z
locked before the power failure. If the product loses power,
appliance will automatically go into the lockout position. The
surface	burners		cannot be activated		until power is restored		and	_
the Cooktop Lockout is disengaged.
To Lock/Unlock			Cooktop:					_
Before	using,	turn all control		knobs	to OFF. Press and	hold	the	_
TOP keypad		for 5 seconds		until a single tone and "Loc		on" will		_
appear on the display. After 5 seconds, "Loc on" wilt disappear
from the display, and a picture of the cooktop will appear.

Repeat to unlock cooktop. "Loc OFF" will appear on the display for 5 seconds and the picture of the cooktop will disappear from the display.

7