Kenmore 721.64682 manual Electrical requirements, Grounding Instructions, Save Theseinstructions

PRECAUTIONS TO AVOID

EXPOSURE TO EXCESSIVE

ENERGY

(a)Do not attempt to operate this oven with the door open since open - door operation can result in harmful exposure to microwave energy. It is important not to defeat or tamper with the safety interlocks.

(b)Do not place any object between the oven front face and the door or allow soil or cleaner

residue to accumulate on sealing surfaces.

Electrical requirements

Observe all governing codes and ordinances. A 120 Volt, 60 Hz, AC only, 20 amp fused electrical supply is

required. (A time-delay fuse is recommended.) It is recommended that a separate circuit serving only this appliance be provided.

POSSIBLE

MICROWAVE

(c)Do not operate the oven if it is damaged. It is particularly important that the oven door close properly and that there is no damage to the:

(1)Door (bent),

(2)Hinges and latches (broken or loosened),

(3)Door seals and sealing surfaces.

(d)The oven should not be adjusted or repaired by anyone except properly qualified service personnel.

Electrical Shock Hazard

Plug into a grounded 3-prong outlet. Do not remove ground prong. Do not use an adapter.

Do not use an extension cord. Failure to follow these

instructions can result in death,

fire, or electrical shock.

GROUNDING INSTRUCTIONS

•For all cord connected appliances: The microwave oven must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric

shock by providing an escape wire for the electric current. The microwave oven is

equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.

Ensure proper ground exists before use

WARNING: Improper use of the grounding can result in a risk of electric shock.

Consult a qualified electrician or serviceman if the grounding instructions are not completely understood, or if doubt exists as to whether the microwave oven is properly grounded.

Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or serviceman install an outlet near the microwave oven.

•For a permanently connected appliance: The microwave oven must be connected

to a grounded, metallic, permanent wiring system, or an equipment grounding conductor should be run with the circuit conductors and connected to the

equipment grounding terminal or lead on the microwave oven.

SAVE THESEINSTRUCTIONS

6