B. REMOVING THE OUT CASE(Figure 8)
(1)Remove the vent grille by removing two screws securing it to the out case.
(2)Remove two screws securing it to the front bracket.
(3)Remove two screws securing it to the air duct.
(4)Remove the mounting plate by turning the two screws securing it to the out case.
(5)Remove the base plate by removing four screws securing it to the out case. Remove the Mount, All from the out case by removing two screws securing it to the out case.
(6)Remove four screws from the rear section.
(7)Remove the outcase with pushing it back.
Mount, All
Power code
Door
Mounting
Plate
Out Case
Vent Grille
Controller
Figure 8