Kenmore 790.4659 Adjusting the Oven Temperature, Setting Oven Controls cont’d, To set Warm & Hold

Setting Oven Controls (cont’d)

Setting the Warm & Hold™ Feature

The WarmHold& pad turns ON the Serve Warm & Hold feature and will maintain an oven temperature of 170° F (77°C). The Warm & Hold feature will keep oven baked foods warm for serving up to 3 hours after cooking has finished. After 3 hours the Warm & Hold feature will shut the oven OFF automatically. The Warm & Hold feature may be used without any other cooking operations or can be used after cooking has finished using TIMED BAKE or DELAY START BAKE.

To set Warm & Hold:

1.Arrange interior oven racks and place baked food in oven. If the food is already in the oven go to step 2.

2.Press WarmHold& . " — —" will appear in the display and the Warm & Hold indicator light above the pad will turn ON. Note: If no further pads are touched within 6 seconds the request to turn ON Warm & Hold will be cleared.

3.Press or to start.

4.To turn Warm & Hold OFF at any time press STOPClear . The Warm & Hold indicator light above the pad will turn OFF.

To set Warm & Hold to turn ON automatically:

1.Arrange interior oven racks and place food in oven. Set the oven properly for Timed Bake or Delay Start Bake.

2.Press WarmHold& . " — —" will appear in the display and the Warm & Hold indicator light above the pad will turn ON.

3.To turn Warm & Hold OFF at any time press STOPClear . The Warm & Hold indicator light above the pad will turn OFF.

Adjusting the Oven Temperature

Your oven control has been precisely set at the factory. This setting may differ from your previous oven however, so your recipe times may not give you the results you expect. If you think that the oven is cooking too hot or too cool for your recipe times, you can adjust the control so that the oven cooks hotter or cooler than the temperature displayed.

To Adjust Oven Temperature:

1.Press Bake.

2.Set the temperature to 550°F (287°C) by pressing and holding the .

3.Within 2 seconds, press and hold Bake until the 2 digit display appears. Release Bake. The display now indicates the

amount of degrees offset between the original factory temperature setting and the current temperature setting. If the oven control has the original factory calibration, the display will read "0."

4.The temperature can now be adjusted up or down 35°F or 19°C, in 5°F or 1°C steps by pressing and holding the

or . Adjust until the desired amount of offset appears in the display. When lowering the oven temperature, a minus sign (-) will appear before the number to indicate that the oven will be cooler by the displayed amount of degrees.

5.When you have made the desired adjustment, press STOPClear to go back to the time of day display.

Note: Oven temperature adjustments made will not change the Self-Cleaning feature temperature.

18