Kenmore 790.4807, 790.4809, 790.4808 manual To use the meat probe, You may, You wish for

Setting Oven Controls

Using and Setting Meat Probe

To use the meat probe:

1.Prepare the food and properly insert the temperature probe into the food. DO NOT PREHEAT or start cooking before

properly inserting the meat probe. The probe should be inserted into the food and receptacle while the oven is still cool.

2.Place the prepared food on the desired oven rack position and slide into the oven.

3.Hug the meat probe into the probe receptacle located on the left front oven cavity side.

4.Close the oven door.

5.The oven control wiii detect if the meat probe is correctly plugged in and wiii illuminate with/_ icon in the display.

6.The actual meat probe temperature will appear in the display.

Meat

7.To set the target temperature press Probepad once then enter the desired the desired target internal temperature using the

numeric

key

pads

(default

setting

is 1700F/770C)

_.

Press _

to

accept

the

meat

probe

target

temperature.

8.

Set the

oven

control

for W,

_

or

_

and

the

desired

oven

temperature.

You may

use the

meat probe

with

some

other

baking

features

but

not be set with Broll or Fle×-Clean.

9.

During

the

cooking

process

the

actual

meat

probe

temperature

will

be

displayed.

If the

Meat

10.

target

temperature

needs

to be

changed

during the

cooking

process_

press

Probeand use

the numeric

keypads

to

adjust

the

target

temperature.

Press the _

key

to

accept

the change.

Seftlng the oven fo automaflcally stop cooking after reaching meat probe target temperature:

The oven leaves the factory preset to alert you when the internal target temperature has been reached and to continue with the keep warm feature. You may desire to change how your oven reacts when using the meat probe.

Note: Changing how the meat probe reacts must be done before starting the cooking process.

1.To set oven to shut-offthe baking function and continue in keep warm after reaching the Meat Probe target temperature

press

Meat

hold

for

7

seconds

then

use

Flex

toggle

to the

message

CANCEL then

press

Q

to accept.

Probeand

the Cleankey

2.

Use

the

Flex

toggle

back

to

COntlnU

and then

press

Q

to

accept if

you wish for the

oven

to continue

cooking

Cleankey to

after

the

meat

probe

reaches

the

target

temperature.

22