Kenmore 790.4808 Adjusting Oven Temperature, Self Cleaning, Instructions, Press, Fig, necessary

Self Cleaning

INSTRUCTIONS PRESS DISPLAY

When the Self-CleanCycle is Completed

1.The "DOOR LOCKED", "CLEAN" and "HOT" icon wiil remain in

the display.

. Once the oven has cooled down for approximately 1 HOUR, andFig. 1 the "DOOR LOCKED" icon is no longer displayed, the oven door

can then be opened.

Stopping or		interrupting	a SeJf=Cleanlng	Cycle
If	it becomes	necessary	to stop or interrupt	a self-cleaning cycle due
to excessive smoke or fire in the oven:				@
1.	Press @.

2.Once the oven has cooled down for approximately 1 HOUR, and the "DOOR LOCKED" icon is no longer displayed, the oven door can then be opened (Fig. 1).

Adjusting Oven Temperature

The temperature in the oven has been pre-set at the factory. When first using the oven, be sure to follow recipe times and temperatures. If you think the oven is cooking too hot or too cool for the temperature you select, you can adjust the actual oven temperature to be more or less than what is displayed. Before adjusting, test a recipe by using a temperature setting that is higher or lower than the recommended temperature. The baking results should help you to decide how much of an adjustment is needed.

Note: The oven temperature adjustments made with this feature will not change

the Self-Clean cycle temperature.

INSTRUCTIONS

To adjust the oven temperature higher

1. Press _ for 6 seconds. "UPO" and degree offset will appear in the display (Fig. 2).

. To increase the temperature use the number pads to enter the desired change (Example 30°F) 30 (Fig. 3). The temperature may be increased as much as 35°F (19°C).

. Press s_ to accept the temperature change and the display will

return to the time of day (Fig. 4). Press _ to reject the change if necessary.

To adjust the oven temperature lower

1. Press _ for 6 seconds. "UPO" and degree offset will appear in the display (Fig. 2).

2.To decrease the temperature use the number pads to enter the

Flex

desired change (Example -30°F) 30 and then press Clean(Fig. 5). The temperature may be decreased as much as 35°F (19°C).

3.Press _ to accept the temperature change and the display will

return to the time of day (Fig. 4). Press _ to reject the change if

necessary.

PRESS

3O

or

@

Q

FJex

3 0 cleo0

or

@

DISPLAY

Fig. 2

Fig. 3

Fig. 4

Fig. 5

29